William Brantley, BS, MS, PhD
MS/Specialty
Carnegie Institute of Technology, 1965, Metallurgical Engineering
PhD
Carnegie Mellon University, 1968. Metallurgy and Materials Science
Following active military duty from 1968-1970 in the Ceramics Division of the Army Materials and Mechanics Research Center and industrial research experience in the Compound Semiconductor Materials Department at Bell Laboratories from 1970-1974, I joined the Marquette University School of Dentistry as an Assistant Professor in the Department of Dental Materials. During 15 years at Marquette, I was promoted to Professor, became Department Chair, served 5 years as the Director of Dental Graduate Studies, and directed the MS Program in Dental Materials. I was Professor in the Ohio State University College of Dentistry since the summer of 1989, directing the graduate program in dental materials, and I retired from the full-time faculty at the end of June 2017. I also had a courtesy faculty appointment in the Department of Biomedical Engineering. I have been mentor for several Visiting Scholars and maintained active research collaborations with Dr. Masahiro Iijima (Hokkaido University, Japan) and Dr. Han-Cheol Choe (Chosun University, South Korea). In the 2017 Autumn Semester I returned to the College as Professor Emeritus in the Division of General Practice and Materials Science.
Dental metallurgy; prosthodontic, orthodontic and endodontic materials; application of materials science principles to dental and biomedical materials. Current research focus areas are nickel-titanium rotary endodontic instruments, metal-ceramic systems for prosthodontics, microstructural and mechanical property characterization of dental materials, thermal analysis of dental materials, new technologies for dental materials, and titanium biomedical alloys
Substantial past NIH research grant funding for extensive investigations of high-palladium dental alloys for metal-ceramic restorations. Materials and dental laboratory support has been provided by Ivoclar Vivadent (US) for projects on metal-ceramic systems (alloy characterization and bonding to porcelain).
Published Articles
Sun D, Brantley WA, Frankel GS, Heshmati RH, Johnston WM. Potentiodynamic polarization study of the corrosion behavior of palladium-silver dental alloys. J Prosthet Dent (in press — doi: 10.1016/j.prosdent.2017.06.026).
Al-Meraikhi H, Yilmaz B, McGlumphy E, Brantley W, Johnston WM. In vitro fit of CAD-CAM complete arch screw-retained titanium and zirconia implant prostheses fabricated on 4 implants. J Prosthet Dent (in press — doi: 10.1016/j.prosdent.2017.04.023).
Rebeeah HA, Yilmaz B, Seidt JD, McGlumphy E, Clelland N, Brantley W. Comparison of 3D displacements of screw-retained zirconia implant crowns into implants with different internal connections with respect to screw tightening. J Prosthet Dent 2018;119:132-137.
Al-Meraikhi H, Yilmaz B, McGlumphy E, Brantley WA, Johnston WM, Distortion of CAD-CAM-fabricated implant-fixed titanium and zirconia complete dental prosthesis frameworks. J Prosthet Dent 2018;119:116-123.
Alshahrani FA, Yilmaz B, Seidt JD, McGlumphy EA, Brantley WA. A load-to-fracture and strain analysis of monolithic zirconia cantilevered frameworks. J Prosthet Dent 2017;118:752-758.
Kawamura N, Iijima M, Ito S, Brantley WA, Alapati SB, Muguruma T, Kawaguchi K, Saito T, Mizoguchi I. Wear characteristics and inhibition of enamel demineralization by resin-based coating materials. Eur J Oral Sci 2017;125:160-167.
Byeon I-S, Hwang I-J, Choe H-C, Brantley WA. Electrochemically-coated hydroxyapatite films on nanotubular Ti–Nb alloys prepared in solutions containing Ca, P, and Zn ions. Thin Solid Films 2016;620:132-138.
Jeong Y-H, Choe H-C, Brantley WA. Hydroxyapatite-silicon film deposited on Ti–Nb–10Zr by electrochemical and magnetron sputtering method. Thin Solid Films 2016;620;114-118.
Kang J-I, Son M-K, Choe H-C, Brantley WA. Bone-like apatite formation on manganese-hydroxyapatite coating formed on Ti-6Al-4V alloy by plasma electrolytic oxidation. Thin Solid Films 2016;620;126-131.
Kim D-G, Elias KL, Jeong Y-H, Kwon H-J, Clements M, Brantley WA, Lee DJ, Han J-S. Differences between buccal and lingual bone quality and quantity of peri-implant regions. J Mech Behav Biomed Mater 2016;60:48-55.
Park S-Y, Jo C-I, Choe H-C, Brantley WA. Hydroxyapatite deposition on micropore-formed Ti-Ta-Nb alloys by plasma electrolytic oxidation for dental applications. Surf Coat Technol 2016;294:15-20.
Kim J-J, Byeon I-S, Brantley WA, Choe H-C. Highly ordered nanotubular film formation on Ti-25Nb-xZr. Thin Solid Films 2015;596:94-100.
Byeon I-S, Lee K, Choe H-C, Brantley WA. Surface morphology of Zn-containing hydroxyapatite (Zn-HA) deposited electrochemically on Ti–xNb alloys. Thin Solid Films 2015;587:163-168.
Khmaj MR, Khmaj AB, Brantley WA, Johnston WM, Dasgupta T. Comparison of the metal-to-ceramic bond strengths of four noble alloys with press-on-metal and conventional porcelain layering techniques. J Prosthet Dent 2014;112:1194-1200.
Kim E-S, Jeong Y-H, Choe H-C, Brantley WA. Preparation of silicon-substituted hydroxyapatite coatings on Ti-30Nb-xTa alloys using cyclic electrochemical deposition method. Thin Solid Films 2014;572:99-104.
Jeong Y-H, Kim W-G, Choe H-C, Brantley WA. Control of nanotube shape and morphology on Ti-Nb(Ta)-Zr alloys by varying anodizing potential. Thin Solid Films 2014;572:105-112.
Kim E-J, Jeong Y-H, Choe H-C, Brantley WA. Electrochemical behavior of hydroxyapatite/TiN multi-layer coatings on Ti alloys. Thin Solid Films 2014;572:113-118.
Kim H-J, Jeong Y-H, Choe H-C, Brantley, WA. Hydroxyapatite formation on biomedical Ti-Ta-Zr alloys by magnetron sputtering and electrochemical deposition. Thin Solid Films 2014;572:119-125.
Jo C-I, Jeong Y-H, Brantley WA, Choe H-C. Hydroxyapatite precipitation on nanotube surfaces of Ti–35Ta–xNb alloys. J Nanosci Nanotech 2014;14:7581-7584.
Kim H-J, Jeong Y-H, Brantley WA, Choe HC. Nanotube nucleation phenomena on Ti–25Ta–xZr alloys for implants using ATO technique. J Nanosci Nanotech 2014;14:7569-7573.
Kim H-J, Jeong Y-H, Choe H-C, Brantley WA. Surface characteristics of hydroxyapatite coatings on nanotubular Ti–25Ta–xZr alloys prepared by electrochemical deposition. Surf Coat Technol 2014;259:274-280.
Kim S-H, Jeong Y-H, Choe H-C, Brantley WA. Morphology change of HA films on highly ordered nanotubular Ti–Nb–Hf alloys as a function of electrochemical deposition cycle. Surf Coat Technol 2014;259:281-289.
Jeong Y-H, Kim E-J, Brantley WA, Choe H-C. Morphology of hydroxyapatite nanoparticles in coatings on nanotube-formed Ti–Nb–Zr alloys for dental implants. Vacuum 2014;107:297-303.
Muguruma T, Iijima M, Brantley WA, Ahluwalia KS, Kohda N, Mizoguchi I. Effects of third-order torque on frictional force of self-ligating brackets. Angle Orthod 2014;84:1054-1061.
Book Editor
Eliades T, Brantley WA (editors). Orthodontic Applications of Biomaterials: A Clinical Guide. Elsevier, Amsterdam, 2017.
Book Chapters
Brantley W, Berzins D, Iijima M, Tufekçi E, Cai Z. Structure/property relationships in orthodontic alloys [Chapter 1]. In: Eliades T, Brantley WA (editors). Orthodontic Applications of Biomaterials: A Clinical Guide. Elsevier, 2017.
Eliades T, Zinelis S, Kim D-G, Brantley W. Structure/property relationships in orthodontic polymers [Chapter 2]. In: Eliades T, Brantley WA (editors). Orthodontic Applications of Biomaterials: A Clinical Guide. Elsevier, 2017.
Zinelis S, Brantley W. Structure/property relationships in orthodontic ceramics [Chapter 3]. In: Eliades T, Brantley WA (editors). Orthodontic Applications of Biomaterials: A Clinical Guide. Elsevier, 2017.
Iijima M, Zinelis S, Papageorgiou S, Brantley W, Eliades T. Orthodontic brackets [Chapter 4]. In: Eliades T, Brantley WA (editors). Orthodontic Applications of Biomaterials: A Clinical Guide. Elsevier, 2017.
Eliades T, Brantley W. In vitro friction assessment in orthodontics [Chapter 5]. In: Eliades T, Brantley WA (editors). Orthodontic Applications of Biomaterials: A Clinical Guide. Elsevier, 2017.
Eliades T, Bradley TG, Brantley W. Material properties and effects on mechanotherapy [Chapter 7]. In: Eliades T, Brantley WA (editors). Orthodontic Applications of Biomaterials: A Clinical Guide. Elsevier, 2017.
Brantley W, Berzins D. Adverse effects from orthodontic alloys [Chapter 8]. In: Eliades T, Brantley WA (editors). Orthodontic Applications of Biomaterials: A Clinical Guide. Elsevier, 2017.
Cai Z, Iijima M, Eliades T, Brantley W. Frequent handling mistakes during bonding [Chapter 10]. In: Eliades T, Brantley WA (editors). Orthodontic Applications of Biomaterials: A Clinical Guide. Elsevier, 2017.
Eliades T, Brantley W. Bond strength and its limited role in assessing efficacy [Chapter 11]. In: Eliades T, Brantley WA (editors). Orthodontic Applications of Biomaterials: A Clinical Guide. Elsevier, 2017.
Kloukos D, Sifakakis I, Eliades T, Brantley W. Bonding of fixed lingual retainers in orthodontics [Chapter 15]. In: Eliades T, Brantley WA (editors). Orthodontic Applications of Biomaterials: A Clinical Guide. Elsevier, 2017.
Uçar Y, Brantley W. Biocompatibility of Dental Amalgams. In: Biocompatibility of Dental Biomaterials (Richard Shelton, editor). Chapter 7. Woodhead/Elsevier, 2017.
Brantley WA, Laub LW, Drago CJ. Metal selection. In: Rosenstiel SF, Land MF, Fujimoto J (editors). Contemporary Fixed Prosthodontics (5th edition). Chapter 19. Framework Design and Metal Selection for Metal-Ceramic Restorations. Elsevier/Mosby, 2016. pp. 529-541. [Portion of chapter]
Brantley WA, Laub LW, Drago CJ. Porcelain-alloy bonding. In: Rosenstiel SF, Land MF, Fujimoto J (editors). Contemporary Fixed Prosthodontics (5th edition). Chapter 24. Metal-Ceramic Restorations. Elsevier/Mosby, 2016. pp.654-657. [Portion of chapter]
Publications in Refereed Conference Proceedings
Chowdhury R, Wheeler MR, Clark WAT, Brantley WA, Nusstein JM. Advanced microstructural study of nickel-titanium rotary endodontic instrument tips. In: Singh G, Bhalla A, Mahmoud MM, Castro RHR, Bansal NP, Zhu D, Singh JP, Wu Y (editors). Processing, Properties, and Design of Advanced Ceramics and Composites. Ceram Trans 2016;259:295-300. (MS&T 2015 Symposia Proceedings)
Brantley WA, Iijima M, Clark WAT, Schricker SR, Nusstein JM, Mizoguchi I. Micro-x-ray diffraction study of new nickel-titanium rotary endodontic instruments. In: Narayan R, Bose S, Bandyopadhyay A (editors). Biomaterials Science: Processing, Properties and Applications V. Ceram Trans 2015;254:47-54. (MS&T 2014 Symposium Proceedings)
Fathalah A, Brantley WA, Jeong Y-H, Rosenstiel SF, Bryington MS, Clark WAT, Drago C. Metallurgical characterization of laser-sintered cobalt-chromium dental alloy. In: Bose S, Bandyopadhyay A, Narayan R (editors). Biomaterials Science: Processing, Properties and Applications IV. Ceram Trans 2014;251:11-20. (MS&T 2013 Symposium Proceedings)
3005-L Postle Hall
305 W. 12th Ave.
Columbus, OH 43210
United States